#WHAT EVERYTHING MEANS OIN THE STELLARIUM INTERFACE INSTALL#
It is also advisable to install a switch per motor. This can be done with a small extension cable (1) or directly on the print (2). PCB can break when the load becomes too large. It is advisable to install a USB mounting connector because the mini-usb connector on the With current limiter is therefore very desirable during installation. Small errors can lead to short circuits and a fuse saves you much worse. There can always be situations where the interface is overloaded. When using a battery or a fixed power supply, make sure that a fuse is placed between the power source. Older encoders (analogue disc with LED and photo sensor only) are not supported.Ībsolute encoder are supported with SPI or I² d.m.
The FreeGo2 supports two AB encoders at TTL level. Make sure you test the Servo beforehand and that it runs correctly.
The FreeGo2 supports DC servos up to 24V 1.5A without cooling, up to 4A and more with cooling. Power supply, universal meter, soldering iron and tin, small watchmaker screwdriver, To install the interface, the following resources are required: adjustable It is important that you first read this to avoid unnecessary damage to servos, interface and annoyance. To make the installation as easy as possible, we have put together an installation procedure for you. are thus installed outside the interface. Such as the RJ6 connector for ST4 Guiding, have been placed on a separate PCB.Ĭonnectors, fuse holder (2A), switches etc. All components that can quickly break down, All connections to the FreeGo2 are made via screwĬonnectors with the mini USB. Lights, switch and JR6 or JR45 connectors.
That is why we have opted for fuse holders, The FreeGo2 interface has been designed to be as compact as possible to give all flexibility How do you install the FreeGo2 interface? Step 2 - installation and testing of the encoders Start the FreeGo2 setup and hardware step-by-step planĤ. Preparing the installation interface for 2 servos with incremental encodersĢ.
0 kommentar(er)
